We stock the most universally used surge protection devices & can ship to you today.
The Edco SLAC Series suppressor to protect electronic instruments used by the water/wastewater industries.
DRS Series (DC Power) Three-Stage Hybrid Technology DIN Rail-Mountable Suppression Module.
An advanced three-stage hybrid, solid-state power line protector for commercial and industrial applications.
EDCO CAT6-POWER OVER ETHERNET SERIES
Ideal for protecting expensive computer and video equipment from damaging surges and transients.
Designed to shunt electrical type transients affecting the electrical distribution inside a traffic cabinet.
Edco Powersure® eMcseries 120/240 VAC Heavy Duty (Parallel) to protect AC distribution panel circuits or 120 V power supplies feeding sensitive electronic equipment.
Edco PC642 Series (Zone/Loop/Data) a two-pair (four-wire) module implementing three-stage hybrid technology. Windemuller price includes the PCB1B separate base.
The Edco SLCP Series Two Pair SLC Loop Protector (Modular) is a four-wire module designed to protect signaling line circuits (SLC). Windemuller price includes the PCB1B separate base.
EDCO PHC-043 SERIES
Edco PHC Series Two-Pair Signaling Circuit Protector Surge Protection Device specifically for alarm and security systems where operating currents can be as high as 5 Amps. Intended to mate with an Edco PCB1B-WKEY gold-plated female terminal connector which is included in Windemuller price.
EDCO PHC-036 SERIES
Edco PHC Series Two-Pair Signaling Circuit Protector Surge Protection Device. Electrically, the Edco PHC Series is a rugged series hybrid implementing a staged complement of MOVs, copper wound inductors and Silicon Avalanche Diodes. These products are intended to mate with an Edco PCB1B-WKEY gold-plated female terminal connector (included in Windemuller price).
EDCO HSP-121A SERIES
A UL 1449 Listed, three-stage power line protector. Features include noise ﬁltering, NEMA-4X enclosure, common mode and normal mode protection. It offers a replaceable fuse designed to remove the load (protected equipment) from the line if the unit is either overloaded or the internal protection fails.
A single phase surge suppressor to protect AC distribution panel circuits or 120V power supplies feeding sensitive electronic equipment.
EDCO CAT6-5POE SERIES
Ideal for protecting expensive equipment against surges and transients entering a building on exposed transmission lines. It features both female to female and male to female RJ-45 connection options for ease of installation.
The Islatrol SP-6TVN Industrial Surge Suppression plug-in unit protects sensitive home or office equipment from damaging power disturbances traveling through wiring to electrical outlets.
Islatrol IE Series: DIN/Flange-Mount High-Frequency Noise Filter/Surge Suppressor. Its ideal applications include critical industrial loads drawing up to 20 Amps of continuous current, while typical applications include any microprocessor-based products, including industrial PLCs, OEM applications, and motion control systems.
ISLATROL IC+130 SERIES
Islatrol™ IC+/LRIC+ Series – Active Tracking Filter™ Series connected high-frequency noise filter with transient protection. Applications include industrial or office equipment, computers placed in harsh environments.
Designed to be easily installed in power and control panels using standard DIN-rail mounting brackets. This series of product offers 40,000 amps of both normal and common mode surge protection.